FM Approvals Certification

Home
Company
FM Approvals Certification

Certified
by FM Approvals

Lumicent is the only FM Approvals Class II solution of its type – independent validation that its monitoring hardware meets rigorous standards for performance, reliability, durability and industrial loss prevention.</p><p>That's not a self-declared claim; it's third-party tested. The certification covers the full system: the cloud platform, the Asset Gateway, and the Motion Alert sensors — approved for condition monitoring of switchgear and other high-voltage equipment (FM 6510) and, as of August 2026, rotating machinery (FM 6530), including vibration monitoring.</p><p>Its out-of-band architecture monitors physical assets independently of production-control networks, enabling organizations to expand visibility without disrupting critical control infrastructure.

Verified on an ongoing basis, not just once

FM Approvals doesn't test once and walk away. The facility that manufactures the Asset Gateway and Motion Alert sensors is subject to recurring surveillance audits that confirm current production still matches the approved design — same drawings, same materials, same test procedures. Any change to a component or a supplier has to be approved by FM Approvals before it reaches production.

Certification timeline

  • May 2024: Original approval issued under FM 6510:2021, Certificate FM24US0035X.
  • August 2026: Certification expanded to FM 6530:2024, adding vibration monitoring for rotating machinery.

What's been tested

Every rating below was independently verified by FM Approvals:

  • Operating temperature range: -40°C to +55°C
  • Ambient temperature monitoring: -40°C to +40°C, accurate to ±2°C, repeatable to ±1°C
  • Vibration monitoring: 0 to 4 G amplitude (±10% accuracy, ±5% repeatability); 3.125–150 Hz frequency (±1% accuracy and repeatability)
  • Alarm types: motion, ambient temperature, and vibration, with 10 selectable sensitivity levels
  • Data path: Bluetooth 5 from sensor to gateway; Cellular 4G LTE Cat 1 from gateway to cloud
  • Power: 100–240 VAC for the Asset Gateway; a 3V lithium coin cell for the Motion Alert sensor

Act before exposure
becomes loss

See how Lumicent helps physical operations teams reveal emerging risk, prioritize what matters most, and drive action before failure occurs.

Book a Demo

Frequently asked questions

Is Lumicent FM Approved?

Yes. Lumicent is the only FM Approvals Class II solution of its type – independent validation that its monitoring hardware meets rigorous standards for performance, reliability, durability and industrial loss prevention.

What does FM Approvals Class II approval mean?

It means the hardware has been independently tested against rigorous standards for performance, reliability, durability and industrial loss prevention, rather than relying on the manufacturer's own claims.

What exactly does Lumicent's FM approval cover?

The certification covers the full system: the cloud platform, the Asset Gateway, and the Motion Alert sensors. It spans two FM Approvals standards: FM 6510 for switchgear and other high-voltage equipment, and FM 6530 for rotating machinery, including vibration monitoring.

Does Lumicent's FM Approval cover vibration monitoring?

Yes. In August 2026, Lumicent's certification was expanded to FM 6530, the standard for condition monitoring of rotating machinery, adding vibration monitoring for amplitude and frequency alongside the existing motion and temperature monitoring.

Does FM approval affect insurance or underwriting?

An FM-approved mark is a standard insurers already use to evaluate equipment risk, which is why it's referenced on the Insurance Position and CRO pages as well as here.

Does the certified hardware connect to our network?

No. Lumicent's out-of-band architecture monitors physical assets independently of production-control networks, so organizations can expand visibility without disrupting critical control infrastructure.

How often is Lumicent's certification re-verified?

FM Approvals conducts recurring surveillance audits of the manufacturing facility to confirm current production still matches the approved design. It isn't a one-time badge.

What conditions has the hardware actually been tested for?

Independent testing covers a -40°C to +55°C operating range, ±2°C temperature accuracy, and vibration measurement across 3.125–150 Hz. Full ratings are listed above.

How can I verify this certification independently?

Look up Certificate FM24US0035X at approvalguide.com, FM Approvals' public registry of certified products.